| 62.20.0560.000.11.1503 Standard 5 Slewing Ring Bearings | Basic static load rating (C0):13,3 kN; Bearing number:61911; Width (mm):13; Weight:0,19 Kg; r2 min.:1 mm; r1 min.:1 mm; Outer Diameter (mm):80; Bore Diameter (mm):55; B:13 mm; Basic dynamic load rating (C):16 kN; C:13 mm; Size (mm):55x80x13; d:55 mm; D:80 mm; |
| 232.20.0500.503 Type 21/650.2 Standard 5 Slewing Ring Bearings | Size (mm):60x110x22; Weight:0,78 Kg; Width (mm):22; Basic dynamic load rating (C):54,2 kN; Bore Diameter (mm):60; Basic static load rating (C0):35,28 kN; C:22 mm; D:110 mm; Bearing number:6212-ZZNR; d:60 mm; Outer Diameter (mm):110; B:22 mm; |
| 162.20.0560.891.21.1503 Standard 5 Slewing Ring Bearings | Dimension C:4.29 in; Pre Install Clearance Min:0.0020 in; Eng Internal Radial Clearance - Min:0.0020; Dimension F:12.44 in; Dimension SA:3.62 in; Locking Style:Single Concentric; Weight:46.0 lb; Shaft Tolerance:0.0020 in; Shaft Size :2-15/16 in; Engineering Group:Mounted Bearing; C0 - Sta |
| 232.20.0500.013 Type 21/650.2 Standard 5 Slewing Ring Bearings | H1:112.0 mm; L:380.00 mm; G:M16; Lockwasher:MB17; Seal Type:Labyrinth; Max Grease Speed:3000; Bolt Qty:4; J:320.00 mm; Max Oil Speed:3500; A2:178 mm; Locknut:KM17; Locating Rings (width x OD):SR180X5; J1:60 mm; Adapter Sleeve1:H2317; Seal:LO617; Shaft Diameter d:75 mm; N:18 mm; Bearing:22317K; C0 St |
| 60.30.0550.100.11.1504 Standard 5 Slewing Ring Bearings | D:12.5984 in; Bearing Weight:90.9 lb; G2 - Heat Generation Factor (Rib-Roller End):126; Series:93000; T - Bearing Width across Cups:5.2499 in; Aa - Cage-Cone Backface Clearance:0 in; r - Cup Backface To Clear Radius2:0.130 in; Cup Part Number:J93129A; Y1 - ISO Factor9:1.29; G1 - Heat Generation Fact |
| 62.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings | L1:64,5 mm; D2:27 mm; d2:22 mm; Angle:20 °; Bearing number:SQ16-RS; L2:8 mm; Weight:0,336 Kg; l3 min.:60 mm; D1:22 mm; I:79,5 mm; l2 max.:23,5 mm; d3:44 mm; D3:39 mm; S1:19 mm; l1 min.:23 mm; S2:22 mm; Thread (G):M16×1,5; L3:32 mm; L:84 mm; |
| 232.21.0575.013 Type 21/650.2 Standard 5 Slewing Ring Bearings | Bearing number:HR33213J; D_a1:111; D_b:115; C_:32; db:74; Prod_Type3:TRBSR_MD_A; TC-DA2:13.053; Calculation factor (e):0,39; Sa:6; outer rb:1.5; (Grease) Lubrication Speed:3000 r/min; Oil rpm:4000; inner r:2; TC-DA1:15.085; T-ALP22:10; Db min.:115 mm; r min.:2 mm; Basic dynamic load rating (C):202 k |
| 62.20.0544.575.01.1403 Standard 5 Slewing Ring Bearings | Outer Diameter (mm):58; C:20 mm; D:58 mm; Bore Diameter (mm):25; B:20,6 mm; Bearing number:NKI25X58X20-5NR; Width (mm):20,6; d:25 mm; Size (mm):25x58x20.6; |