| R - Cone Backface To Clear Radius1 | 4.060 mm |
| G2 - Heat Generation Factor (Rib-Roller End) | 75.8 |
| B | 45.750 mm |
| Series | 30228M |
| Y - ISO Factor9 | 1.38 |
| B - Cone Width | 42.000 mm |
| Cage Type | Stamped Steel |
| db - Cone Backface Backing Diameter | 164.08 mm |
| Aa - Cage-Cone Backface Clearance | 4.3 mm |
| Cup Part Number | Y30228M |
| r - Cup Backface To Clear Radius2 | 3.05 mm |
| Db - Cup Backface Backing Diameter | 227.08 mm |
| Ab - Cage-Cone Frontface Clearance | 8.4 mm |
| Design Units | METRIC |
| Cg - Geometry Factor | 0.119 |
| d | 140 mm |
| C90 - Dynamic Radial Rating (90 million revolutions)4 | 130000 N |
| e - ISO Factor8 | 0.44 |
| a - Effective Center Location3 | 2.8 mm |
| Bearing Weight | 8.9 Kg |
| 7SRS15GN+[76-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | hidTable:ecat_NSRDGB; Enclosure Type:Non-Contact Seal; D_a:95; Weight:0,349 Kg; D:100 mm; dynamic load capacity:23700 N; LangID:1; Bore Diameter (mm):70; SRE:4.52; Z_:17; Bore:2.756 Inch | 70 Mill; maximum rpm:6300 RPM; Da max.:95 mm; yobi:6914VV; SRI:4.52; Size (mm):70x100x16; Weight / LBS:2.756; C |
| 7SRS15GSC1+[76-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Average Clearance (Cd):0.1630; OD Chamfer Length (Co):1.800; Shaft Dia., Nominal (d):70.0000; Outer Diameter (mm):75; ID Chamfer Angle (B deg.):45; Lube Hole Dia. (dl):8.000; Material:Carbon steel shell w; ID Chamfer Length (Ci):0.800; Bearing Outside Diameter, Nominal(Do):75.000; Bearing Length Tol |
| 7SRS15GS[SS,SSHH,UU]+[76-900/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Size (mm):19.05x44.45x12.7; Bore Diameter (mm):19.05; Outer Diameter (mm):44,45; Bearing number:4A/6; Width (mm):12,7; d:19.05 mm; D:44,45 mm; |
| 7SRS15GS[SS,SSHH,UU]C1+[76-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Designation SX:CX066; Designation SKF:VKBA 973; Designation FAG:713690190; Bearing number:R172.00; Designation Ruville:7200; |
| 7SRS15GS+[76-900/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Basic dynamic load rating (C):60 kN; Bearing number:6019-2Z; Size (mm):95x145x24; C:24 mm; d:95 mm; Basic static load rating (C0):54 kN; Weight:1,21 Kg; Outer Diameter (mm):145; Width (mm):24; r2 min.:1,5 mm; r1 min.:1,5 mm; Bore Diameter (mm):95; D:145 mm; B:24 mm; |
| 7SRS15GSC1+[76-900/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | da - min.:32 mm; Basic static load rating C0:2.9 kN; Basic static load rating - C0:2.9 kN; r1,2 min.:0.3 mm; r1,2 - min.:0.3 mm; Calculation factor f0:14.1; Basic dynamic load rating C:3.58 kN; C:1.5 mm; Reference speed:34000 r/min; B:7 mm; Size (mm):42x30x7; Outer Diameter (mm):30; Mass bearing:0.0 |
| 7SRS15GS[SS,SSHH,UU]C1+[76-900/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Angle (α):40 °; Basic dynamic load rating (C):60,5 kN; (Grease) Lubrication Speed:5500 r/min; C:20 mm; r min.:1,1 mm; Width (mm):20; Weight:0,932 Kg; Bore Diameter (mm):50; Outer Diameter (mm):90; B:20 mm; d:50 mm; Bearing number:7210BDB; Size (mm):50x90x20; D:90 mm; 2B:40 mm; Basic static |
| 7SRS15GS[SS,SSHH,UU]+[76-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Characteristic rolling element frequency, BSF:3.66 Hz; Characteristic outer ring frequency, BPF0:2.61 Hz; Nlim (grease):8,100 rpm; rs min:1.1 mm; dynamic load capacity:21200 N; Characteristic cage frequency, FTF:0.37 Hz; operating temperature range:-40 to 120 ºC; outer ring width:17 mm; Interna |