| Ab - Cage-Cone Frontface Clearance | 2 mm |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 19400 N |
| db - Cone Backface Backing Diameter | 67.06 mm |
| K - Factor7 | 1.45 |
| C0 - Static Radial Rating | 123000 N |
| e - ISO Factor8 | 0.4 |
| G2 - Heat Generation Factor (Rib-Roller End) | 20.4 |
| Da - Cup Frontface Backing Diameter | 86.40 mm |
| B - Cone Width | 23.000 mm |
| Aa - Cage-Cone Backface Clearance | 0.5 mm |
| da - Cone Frontface Backing Diameter | 59.94 mm |
| Design Units | METRIC |
| D | 90.000 mm |
| C1 - Dynamic Radial Rating (1 million revolutions)5 | 109000 N |
| Cg - Geometry Factor | 0.0925 |
| d | 55.000 mm |
| Y - ISO Factor9 | 1.49 |
| Series | LM506800 |
| G1 - Heat Generation Factor (Roller-Raceway) | 45.6 |
| a - Effective Center Location3 | -2.8 mm |
| 9SRS25GM[SS,SSHH,UU]C1+[78-900/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | d:110 mm; Basic dynamic load rating (C):136 kN; D:160 mm; Width (mm):45; C:136; D_3:165; SRE:9.4; D2:135 mm; SREX:0.065; Outer Diameter (mm):160; Size (mm):110x160x45; Basic static load rating (C0):395 kN; ra max.:1 mm; SRI:9.4; Weight:3,2 Kg; SDM_:135; R:125 mm; GRS rpm:1300; r min.:1,1 mm; D_1:113 |
| 9SRS25GM+[78-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Bore Diameter (mm):35; d:35 mm; B:56,3 mm; Width (mm):56,3; Outer Diameter (mm):148,1; Bearing number:PHU2197; Size (mm):35x148.1x56.3; D:148,1 mm; |
| 9SRS25GM+[78-900/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Static load rating axial (C0):23,9 kN; Weight:0,054 Kg; L:23 mm; Bearing number:NBX 1523; d1:15 mm; D:24 mm; Outer Diameter (mm):24; Static load rating radial (C0):14,9 kN; L1:6,5 mm; Bore Diameter (mm):15; Dynamic load rating axial (C):10,2 kN; r min.:0,3 mm; D1:28 mm; da min.:26 mm; Dynamic load r |
| 9SRS25GM[SS,SSHH,UU]+[78-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Ab - Cage-Cone Frontface Clearance:2 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:19400 N; db - Cone Backface Backing Diameter:67.06 mm; K - Factor7:1.45; C0 - Static Radial Rating:123000 N; e - ISO Factor8:0.4; G2 - Heat Generation Factor (Rib-Roller End):20.4; Da - Cup Frontface Back |
| 9SRS25GM[SS,SSHH,UU]+[78-900/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Cg - Geometry Factor12:0.0945; Bearing Weight:20.86 lb; K - Factor7:1.71; e - ISO Factor8:0.34; Aa - Cage-Cone Backface Clearance:0.11 in; Cone Part Number:756A; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:11100 lbf; Y2 - ISO Factor10:2.95; d:3.1250 in; R - Cone Backface To Clear Radius1: |
| 9SRS25GM[SS,SSHH,UU]C1+[78-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Size (mm):787.4x609.6x206.375; Comparative axial load rating CFa:354 kN; r1,2 min.:6.4 mm; C:158.75 mm; T:206.375 mm; Comparative radial load rating - CF:980 kN; Comparative axial load rating - CFa:354 kN; Calculation factor - Y2:2.7; Design variant/feature:TDO/DC; Bore Diameter (mm):787,4; a:269 mm |
| 9SRS25GMC1+[78-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Housing Width:10.6 in; Ca - Axial Load Rating:17805 lbf; Shipping Weight:994 lb; Note:This product line wa; Series Type:Heavy Series; Support Type:Four-Bolt Plummer Bl; Dimension H:10.512 in; Dimension H2:22.4 in; Dimension J:24.7 in; Dimension H1:2.4 in; Shaft Size:6-11/16 in; Dimension K:5.5 in; C |
| 9SRS25GMC1+[78-900/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | D:7.1250 in; Cg - Geometry Factor:0.136; Da - Cup Frontface Backing Diameter:6.93 in; r - Cup Backface To Clear Radius1:0.06 in; e - ISO Factor2:0.37; Y - ISO Factor3:1.64; Cup Part Number:KLL428310; C - Cup Width:0.6563 in; Design Units:Imperial; Series:LL428300; Db - Cup Backface Backing Diameter: |