9HR1123M+[53-500/1]LM THK Separated Linear Guide Side Rails Set Model HR

Brand Name THK
Model Number 9HR1123M+[53-500/1]LM
Min.Order Quantity 1 pcs
Price Negotiable
PDF 9HR1123M+[53-500/1]LM

Product Details

CategoryPillow Block
Inventory8.0
Minimum Buy QuantityN/A
Weight0.491
Product GroupM06110
Number of Mounting Holes2
Mounting MethodSet Screw
Housing Style2 Bolt Pillow Block
Rolling ElementBall Bearing
Housing MaterialCast Iron
Expansion / Non-expansionNon-expansion
Mounting Bolts1/2 Inch
RelubricatableYes
Insert Part NumberA-UC207-104D1
SealsSingle Lip Land Riding
Housing Configuration1 Piece Solid
Inch - MetricInch
Other FeaturesSingle Row | Wide Inner Race | Has Flinger
Long Description2 Bolt Pillow Block; 1-1/4" Bore; 1-7/8" Base to Center Height; Set Screw Mount; Ball Bearing; Relubricatable; Cast Iron; Single Lip Land Riding; Non-expansion
UNSPSC31171511
Harmonized Tariff Code8483.20.40.40
NounBearing
Keyword StringPillow Block
Manufacturer Item NumberUCP-1.1/4
Weight / LBS1.083
Bolt Spacing Maximum0 Inch | 0Millimeter
Nominal Bolt Center to Center5 Inch | 127 Millimeter
Actual Bolt Center to Center5.1 Inch | 129Millimeter
Bolt Spacing Minimum0 Inch | 0Millimeter
d1.25 Inch | 31.75 Millimeter
D1.689 Inch | 42.9 Millimeter
B1.875 Inch | 47.63 Millimeter
mounting:Two-Bolt Base
overall length:166.688 mm
bore diameter:1.2500 in
overall height:92.869 mm
bore type:Round
finish/coating:Oxide
base to bore centerline:1.8750 in
overall width:1-11/16 in
duty type:Normal Duty
base width:47.625 mm
housing material:Cast Iron
bolt center-to-center length:130.175 mm
locking device:Set Screw
lubrication type:Lubrication Fitting
seal type:Contact with Flinger
end type:Open
expansion type:Non-Expansion Bearing (Fixed)
series:UCP
View more

Company Profile

View more

Related News

  • Hydraulic Pumps | Parts and Components | DTA HydraulicsYou can use hydraulic machines - equipped with a pump - to do different types of work such as lift, lower, open, close or rotate components. A hydraulic pump is  Different types of...
  • Pop the Cavitation Bubble in Hydraulic Systems | ValinSep 22, 2015 — As previously stated, the leading causes of cavitation in hydraulic systems are improper pump suction-line configurations and the use of filters  Pump cavitation: 7 ways...
  • The Right Pump for the Job - Design WorldJul 10, 2009 — A gear pump carries fluid between the teeth of two meshing gears. One gear is driven by the drive shaft and turns an idler gear. Gear and vane pumps are primarily used for fixed flow...
  • Recommended Products

    All Products Contact Now